Envisioning the Zero-Pollution Car

Georgia Tech Team Describes a Vehicle That Recycles Carbon

Researchers have announced a new strategy that would capture carbon as it is burned in vehicles, store it, and then turn it back into fuel at a central processing plant.

The Georgia Tech research, paid for by the federal government, is about goals and strategies, not about proof-on-the-ground technology. The latest on it was published today in Energy Conversion and Management.

While there's been a lot of talk and research about capturing carbon emissions from smokestacks, the challenge of capturing carbon at the tailpipe is not much discussed. Many plans for a low-carbon economy with modern conveniences instead envision electric cars that either run on hydrogen, which produces no carbon emissions, or on electricity, which would be generated at central plants.

The new research offers a new vision. According to the university:

The Georgia Tech team’s goal is to create a sustainable transportation system that uses a liquid fuel and traps the carbon emission in the vehicle for later processing at a fueling station. The carbon would then be shuttled back to a processing plant where it could be transformed into liquid fuel. Currently, Georgia Tech researchers are developing a fuel processing device to separate the carbon and store it in the vehicle in liquid form.

Georgia Tech’s near-future strategy involves capturing carbon emissions from conventional (fossil) liquid hydrocarbon-fueled vehicles with an onboard fuel processor designed to separate the hydrogen in the fuel from the carbon. Hydrogen is then used to power the vehicle, while the carbon is stored on board the vehicle in a liquid form until it is disposed at a refueling station. It is then transported to a centralized site to be sequestered in a permanent location currently under investigation by scientists, such as geological formations, under the oceans or in solid carbonate form.

In the long-term strategy, the carbon dioxide will be recycled forming a closed-loop system, involving synthesis of high energy density liquid fuel suitable for the transportation sector.

Georgia Tech settled on a hydrogen-fueled vehicle for its carbon capture plan because pure hydrogen produces no carbon emissions when it is used as a fuel to power the vehicle. The fuel processor produces the hydrogen on-board the vehicle from the hydrocarbon fuel without introducing air into the process, resulting in an enriched carbon byproduct that can be captured with minimal energetic penalty. Traditional combustion systems, including current gasoline-powered automobiles, have a combustion process that combines fuel and air — leaving the carbon dioxide emissions highly diluted and very difficult to capture.

The Georgia Tech team compared the proposed system with other systems that are currently being considered, focusing on the logistic and economic challenges of adopting them on a global scale. In particular, electric vehicles could be part of a long-term solution to carbon emissions, but the team raised concerns about the limits of battery technology, including capacity and charging time.

The hydrogen economy presents yet another possible solution to carbon emissions but also yet another roadblock — infrastructure. While liquid-based hydrogen carriers could be conveniently transported and stored using existing fuel infrastructure, the distribution of gaseous hydrogen would require the creation of a new and costly infrastructure of pipelines, tanks and filling stations.

The Georgia Tech team has already created a fuel processor, called CO2/H2 Active Membrane Piston (CHAMP) reactor, capable of efficiently producing hydrogen and separating and liquefying CO2 from a liquid hydrocarbon or synthetic fuel used by an internal combustion engine or fuel cell. After the carbon dioxide is separated from the hydrogen, it can then be stored in liquefied state on-board the vehicle. The liquid state provides a much more stable and dense form of carbon, which is easy to store and transport.

The Georgia Tech paper also details the subsequent long-term strategy to create a truly sustainable system, including moving past carbon sequestration and into a method to recycle the captured carbon back into fuel. Once captured on-board the vehicle, the liquid carbon dioxide is deposited back at the fueling station and piped back to a facility where it is converted into a synthetic liquid fuel to complete the cycle.

Now that the Georgia Tech team has come up with a proposed system and device to produce hydrogen and, at the same time, capture carbon emissions, the greatest remaining challenge to a truly carbon-free transportation system will be developing a method for making a synthetic liquid fuel from just CO2 and water using renewable energy sources.

Original here